Banner
Storm Whistle, your security first! Remain always located.
Rob Allen Vecta2 cassette standard model with plastic release system.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Reference: RAMECHCAS
Brand: Rob Allen
Rob Allen Vecta2 cassette standard model with plastic release system.
Reference: ESC43491
Brand: Epsealon
Kit consisting of 2 seals for 28mm barrel and a Delrin® sealant to fix reel.
Reference: RARABRAB11
Brand: Rob Allen
Rob Allen Aluminium barrels are made from aircraft grade aluminium and hard anodized to increase it’s resistance against corrosion and wear. The internal diameter is in the range of 26.2mm, outside diameter at 29.2mm with a wall thickness of 1.5mm. These dimension will vary a little. These barrels are pre-fitted with plugs for the purpose of buoyancy but...
Reference: RAMUZEYE2
Brand: Rob Allen
Stainless D-shackle to put on the speargun muzzle.
Reference: ESC4346
Brand: Epsealon
Muzzle made in Nylon 6 loaded with 30% fiberglass for better resistance. Male fitting with double o-ring seal dia.26mm. Possibility of cable passage on both sides. 316L stainless steel pin underneath for a solid hold of the shock absorber. Supplied with bridge and pin.
Reference: PSPOL-INV-MI-G
Brand: PS-dive
Pair of "U" type movable pulleys for Inverter and Fusion systems with M5 stainless steel D-shackle Resistant and with very low friction index. Pulley Dimensions: Roll diameter: Ø17mm Overall length of pulley: 29mm Maximum line diameter: Ø5 mm Made of 316 stainless steel and acetal.
Reference: RAMECGP00
Brand: Rob Allen
Have you ever got your guns mixed up with another diver. Customizing your gun grip will make your gun much easier to identify. The Rob Allen Vecta grips are packaged with both cheek plates and screws.
Reference: SMSGMPPA
Brand: SpearMaster
Spearmaster muzzle for 28mm barrel, interchangeable between open or closed muzzle.
Reference: RAMUZR10
Brand: Rob Allen
Two Dyneema anchor loops for attaching the elastics to the roller gun anchors. This accessory is designed for Rob Allen roller guns.
Reference: RAMUZEYE
Brand: Rob Allen
Stainless steel piece to put on the speargun muzzle.
Reference: RAMUZR01
Brand: Rob Allen
Rob Allen Roller muzzles with ceramic Bearing and rubber anchors.
Reference: SAL301013
Brand: Salvimar
Open muzzle for 28mm barrel outside diameter.
Reference: RAMECHLR
Brand: Rob Allen
Plastic line release piece on Rob Allen Vecta 2 cassettes. Pin included.
Reference: PSTUBE-U-3k-70
Brand: PS-dive
Robust and at the same time stylish PS-dive tube of 100% carbon fiber 3k matt with integral guide. It is advisable to install accessories after placing sealing plugs. Various lengths available: 70, 80, 90, 100, 110 and 120cm. Internal diameter measurement 26mm. External diameter measurement 30mm.
Reference: RAMECSP00
Brand: Rob Allen
Rob Allen Vecta 2 cassette parts. Internal parts only, body not included.
Reference: ERM0002G
Brand: Ermes-Sub
Handle: The Avatar handle and muzzles are adaptable to all tubes with an internal diameter of 26 to 26.5 mm. You have to cut the excess parts (the spokes in both the handle and the muzzle) to adapt it to your tube, all Ermes aluminum tubes have an internal diameter of 26.5 mm and all Ermes carbon tubes have an internal diameter of 26 mm, it is advisable...
Reference: RAMUZRL4
Brand: Rob Allen
0Rob Allen low profile muzzle for two rubber bands.
Rob Allen Vecta2 cassette standard model with plastic release system.
