List of products by brand Rob Allen

Reference: RARABRAB11

Brand: Rob Allen

Rob Allen Aluminuim Rail Barrel

Rob Allen Aluminium barrels are made from aircraft grade aluminium and hard anodized to increase it’s resistance against corrosion and wear. The internal diameter is in the range of 26.2mm, outside diameter at 29.2mm with a wall thickness of 1.5mm. These dimension will vary a little. These barrels are pre-fitted with plugs for the purpose of buoyancy but...

Reference: RAS75ND2P16

Brand: Rob Allen

Rob Allen Drop Barb Spear 7.5mm Double Pin

The drop barb is Rob Allen's answer to simplifying slip tip setup. The barb is integrated into the spear, eliminating the need for threaded spears with slip tips that can compromise accuracy and penetration.

Reference: RAMECGP00

Brand: Rob Allen

Rob Allen Griper

Have you ever got your guns mixed up with another diver. Customizing your gun grip will make your gun much easier to identify. The Rob Allen Vecta grips are packaged with both cheek plates and screws.

Reference: RABARB02

Brand: Rob Allen

Rob Allen Flopper and Pin

Extra long floper and pin. Available in 7.2 and 8.5cm.

Reference: RAS66NS2N09T

Brand: Rob Allen

Rob Allen 6.6mm Double Notch Shaft (Barb on top)

Rob Allen shafts "Spring Steel" tahitian type with high rigidity and reduced vibration. With double round notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating. Barb on top...

Reference: RAFLPE20

Brand: Rob Allen

Rob Allen PE Floatline Orange

The 4 mm Rob Allen floatline are anti-abrasive and have high buoyancy and low elasticity, provided with loops at both ends, making easy the connection to clips or the float.

Reference: RARABG3X3M

Brand: Rob Allen

Rob Allen TPE Bungee

Rob Allen Bungees, made with TPE rubber are available in lengths of 3m, 5m, 10m and 15m. The elongation is limited to 3x the relaxed rubber length by the 270kg Dynema security line linked to the end loops. When hunting big fish Bungees provide up to 3x additional line when fully stretched by a 10kg load, while simultaneously providing a strong yet gentle...

Reference: RAS66NS2N09

Brand: Rob Allen

Rob Allen 6.6mm Double Notch Shaft (Barb Below)

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With double round notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating. Barb below (Hawaiian...

Reference: RAS75NS2P17

Brand: Rob Allen

Rob Allen 7.5mm Double Pin Shaft

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With round double pins for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded pins. Euro Style. ArmouRite coating.

Reference: RAS75NS2N14

Brand: Rob Allen

Rob Allen 7.5mm Double Notch Shaft

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With round double notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating.

Reference: RAS7NS2N15

Brand: Rob Allen

Rob Allen 7mm Double Notch Shaft

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With double round notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating.

Brand: Rob Allen

ROB ALLEN Rubber 18mm

The Original Rob Allen Blue 18mm Speargun Rubber, 100% Natural Latex for best performance. Sold optionally in fractions of 10cm or per meter. For example, to order 1.2m, you can select 1m and 2 fractions of 10cm or 12 fractions of 10cm.