Reference: ESC7100
Brand: Epsealon
Epsealon Tropedo Buoy Simple Bladder
Single envelope PVC buoy. Supplied with 17m of orange line + “FOX” flag.
Floats and boards for spearfishing
There are 18 products.
Reference: ESC7100
Brand: Epsealon
Single envelope PVC buoy. Supplied with 17m of orange line + “FOX” flag.
Reference: ESC7200
Brand: Epsealon
Double envelope signal buoy. PVC inner bladder and nylon outer envelope. Supplied with 17m of orange line + “FOX” flag. The weight bag is attached to the end of the float. When a 2kg weight is placed, the buoy is in "beacon" mode, thus creating better visibility in the water and greater safety. The beacon position is used to mark a point or mark a...
Reference: ESC7400
Brand: Epsealon
Inflatable board Epsealon multi purpose, 70x114cm.
Reference: NEPNEPFL01
Brand: Neptonics
Inflatable float from Neptonics Systems, with buoyancy of 75 pounds (34kg) on the surface, durable and reliable, built in high strength and abrasion resistant denier nylon. The float has an inflation valve with high quality locking. Due to its characteristics, the Neptonics inflatable float can be used in shore spearfishing, as well as, due to the 75...
Reference: PSBOYA-PS-PRES-15
Brand: PS-dive
15L PS-dive high pressure float, maximum recommended pressure until 2 bar. The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip. The buoy is made with thermo-welds, without any manual gluing...
Reference: PSBOYA-PS-PRES-30
Brand: PS-dive
30L PS-dive high pressure float, maximum recommended pressure until 2 bar.The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip.The buoy is made with thermo-welds, without any manual gluing...
Reference: RAFLTFSH
Brand: Rob Allen
Rob Allen float for flasher. Hydrodynamic format allows excellent behavior when in current.
Reference: RAFLTIN35
Brand: Rob Allen
35L Rob Allen "Remora" inflatable float with recomended 1.5 Bar fill pressure. 2 Long Line Clips included.
Reference: RAFLTINF11
Brand: Rob Allen
11L Rob Allen "Remora" inflatable float with 1.5 Bar Fill Pressure. 2 Long Line clips included.
Reference: RAFLTINF20
Brand: Rob Allen
120L Rob Allen "Remora" inflatable float with 1.5 Bar Fill Pressure. 2 Long Line Clips included.
Reference: RAFLTPU12FW
Brand: Rob Allen
Rob Allen rigid floats, injected with a high density foam that makes them one of the most durable floats designed for long time use.They are supplied with clips at both ends, alfa flag and counterweight.
Reference: RAFLTPU7BL
Brand: Rob Allen
Rob Allen 7L (Air) rigid float. Supplied with 2 clips and Alpha flag.