Shafts & Tips

Reference: RAS75ND2P16

Brand: Rob Allen

Rob Allen Drop Barb Spear 7.5mm Double Pin

The drop barb is Rob Allen's answer to simplifying slip tip setup. The barb is integrated into the spear, eliminating the need for threaded spears with slip tips that can compromise accuracy and penetration.

Brand: Sigalsub

Sigalsub Tahitian 6.5mm Shaft HRC Shark Fins Single Barb

Robust shaft with good finish. Great factory hardness and penetration ability is improved thanks to the cone-shaped sharpening. Technical description: • Produced with 17.4 HP bars certified by the steel mill. • Manufactured by computerized CNC. • It has 4 "sharfin" type pins, 3 pins at the end and a preload pin. • Finely polished pins, which allows its...

Reference: RABARB02

Brand: Rob Allen

Rob Allen Flopper and Pin

Extra long floper and pin. Available in 7.2 and 8.5cm.

Reference: RAS66NS2N09T

Brand: Rob Allen

Rob Allen 6.6mm Double Notch Shaft (Barb on top)

Rob Allen shafts "Spring Steel" tahitian type with high rigidity and reduced vibration. With double round notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating. Barb on top...

Reference: ESC43391

Brand: Epsealon

Epsealon Cone Penetration - pack 3 pcs

Spear tip protection. Available in three different diameters 6.5, 7.0 and 7.5 mm. Sold in 3 units of identical diameter.

Reference: SMUTS8017MEDSH1MINISF1H

Brand: SpearMaster

Spearmaster 8mm 5/16" UNF Thread Shaft 2 Shark Fins and Rest Tab

South African Spearmaster 8mm shafts  high hardness 2050MPa (52 Rockwell), low vibration and 5/16" UNF thread. Have two rounded shark fin pins for dyneema wishbones and one shark fin for loading assistence.

Reference: SMUTS75172MEDSH1MINISF1H

Brand: SpearMaster

Spearmaster 7.5mm M6 Thread Shaft 2 Shark Fins and Rest Tab

South African Spearmaster 7.5mm shafts  high hardness 2050MPa (52 Rockwell), low vibration and M6 thread. Have two rounded shark fin pins for dyneema wishbones and one shark fin for loading assistence.

Reference: RAS66NS2N09

Brand: Rob Allen

Rob Allen 6.6mm Double Notch Shaft (Barb Below)

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With double round notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating. Barb below (Hawaiian...

Reference: RAS75NS2P17

Brand: Rob Allen

Rob Allen 7.5mm Double Pin Shaft

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With round double pins for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded pins. Euro Style. ArmouRite coating.

Reference: RAS75NS2N14

Brand: Rob Allen

Rob Allen 7.5mm Double Notch Shaft

Rob Allen shafts "Spring Steel" hawaiian type with high rigidity and reduced vibration. With round double notches for dyneema wishbones, the sear notch is compatible with the vast majority of the trigger mechanisms of the euro spearguns. The galvanization imparts resistance to corrosion. Rounded noches. Euro Style. ArmouRite coating.

Spearmaster 7mm Shaft "Spring Steel" 2 Shark Fins

South African SPEARMASTER 7mm shafts "Spring Steel", High hardness, low vibration and Hawiian style. Two rounded shark fin pins for dyneema wishbones.

Spearmaster 6.5mm Shaft "Spring Steel" 2 Shark Fins

South African SPEARMASTER 6.5mm shafts "Spring Steel", High hardness, low vibration and Hawiian style. Two rounded shark fin pins for dyneema wishbones.